MILWAUKEE GUTTER
SERVICES

Most Milwaukee homes are fine on 5-inch provided there are enough downspouts. Move to 6-inch with 3x4 downspouts if you have a steep roof at 8/12 or greater, a large roof plane draining into a short run, or a valley discharging onto the gutter. Contractors upsell width because it is visible. Downspout count is the cheaper and more effective fix.

Roughly $9 to $16 per linear foot installed. A typical home with 150 to 200 feet lands around $1,600 to $3,000 depending on gauge, house height and downspout count.

In specific situations. Under pines or anything dropping needles, and on tall houses where you are paying someone to clean twice a year, micro-mesh pays for itself. On a single-story ranch with clear sky above it, fix sizing and downspout routing first and you may not need guards at all.

No. Ice dams form because heat escaping into the attic melts snow that refreezes at the cold eave, and that happens with or without gutters. Gutters full of ice are a symptom. The fix is attic air sealing, insulation and ventilation.

Six to ten feet from the foundation, with the ground falling away from the house for the first six feet. In Milwaukee's clay soils a downspout ending at the wall is the most common cause of a wet basement we see.

Yes, and that is the right sequence. Drip edge, ice barrier and gutter all meet at the eave. Doing them together means one crew owns that detail rather than two crews working around each other.